在线客服

+86-755-89202312

ESC&Flight Control News

tcmm fpv F4 V3 flight controller upgrade version V3.5 V3S built-in image filter OSD

tcmm fpv F4 V3 flight controller upgrade version V3.5 V3S built-in image filter OSD

ESC&Flight Control 1764

Product parameter

Product name: Multifunctional F4 flight controller
Size: 36x36mm
Mounting hole: 30.5×30.5mm
Weight: 7 grams
STM32 F405 MCUs running Betaflight 3.0.1 firmware can run faster cycle times.
Use F4 MCU to control OSD through SPI bus in DMA mode.
OSD configuration is included in Betaflight GUI.
SBUS / PPM input (pin type)
6PWM output (1-4 pin base and Sh1.0 plug, 5-6 as pin base)
With BARO
SPI sensor MPU6000
For the included 128Mbit Flash, please always use BEC for FC.
Supported by BETAFLIGHT and dRonin

product description

★ This flight control adds an image transmission filter;

★Integrate 5V BEC flight control, support direct power input, diversified wiring, simple installation and wiring;

产品图片

产品名:多功能F4飞行控制器
尺寸:36x36mm
安装孔:30.5x30.5mm
重量:7克
运行Betaflight 3.0.1固件的STM32 F405 MCU可以运行更快的循环时间。
使用F4 MCU在DMA模式下通过SPI总线控制OSD。
OSD配置已包含在Betaflight GUI中。
SBUS / PPM输入(针式)
6PWM输出(1-4针座和Sh1.0插头,5-6作为针座)
与BARO
SPI传感器MPU6000
随附的128Mbit Flash,请始终对FC使用BEC。
由BETAFLIGHT和dRonin支持
LabelF4 flight controlfpv drone. Previous page: next page:
展开更多
Leave your contact information and we will reply as soon as possible

loading...

购物车

X

我的足迹

X